升级功能优化

GD32F103C8T6/App/User/Peripheral/Api/api.c

@@ -23,6 +23,7 @@ static uint16_t upgrade_write_index = 0;
 /* 升级包数据接收长度 */
 static uint8_t upgrade_rx_buffer[1024] = {0};
 
+static void api_write_upgrade_buffer(void);
 static void api_notify_upgrade(uint8_t *buffer, uint16_t length);
 static void api_notify_get_fhss_channel(void);
 static void api_package(uint8_t type, uint8_t command, uint8_t *data, uint8_t length);
@@ -199,6 +200,16 @@ void api_upload_data_forwarding(uint8_t type, uint8_t value)
 
 __weak void api_notify_data_forwarding(uint8_t type, uint8_t value) { }
 
+static void api_write_upgrade_buffer(void)
+{
+    /* 写入升级包数据 */
+    fmc_write_bytes(FMC_ADDRESS_UPGRADE_BUFFER + upgrade_write_index * FMC_PAGE_SIZE, upgrade_rx_buffer, upgrade_rx_index / 4 + (upgrade_rx_index % 4 ? 1 : 0));
+
+    upgrade_write_index++;
+    upgrade_rx_length += upgrade_rx_index;
+    upgrade_rx_index = 0;
+}
+
 /**
  * @brief 升级
  */
@@ -226,23 +237,21 @@ static void api_notify_upgrade(uint8_t *buffer, uint16_t length)
         upgrade_pack_index = 0;
     }
 
-    for (uint16_t i = 0; i < pack_length; i++)
-        upgrade_rx_buffer[upgrade_rx_index++] = buffer[i + 9];
-
     if (index == upgrade_pack_index + 1)
     {
         /* 更改ARM接收到的升级包序号 */
         upgrade_pack_index = index;
 
-        if (upgrade_rx_index >= 1024 || upgrade_pack_index == upgrade_pack_count)
+        for (uint16_t i = 0; i < pack_length; i++)
         {
-            /* 写入升级包数据 */
-            fmc_write_bytes(FMC_ADDRESS_UPGRADE_BUFFER + upgrade_write_index * FMC_PAGE_SIZE, upgrade_rx_buffer, upgrade_rx_index / 4 + (upgrade_rx_index % 4 ? 1 : 0));
+            upgrade_rx_buffer[upgrade_rx_index++] = buffer[i + 9];
 
-            upgrade_write_index++;
-            upgrade_rx_length += upgrade_rx_index;
-            upgrade_rx_index = 0;
+            if (upgrade_rx_index >= 1024)
+                api_write_upgrade_buffer();
         }
+        
+        if (upgrade_pack_index == upgrade_pack_count)
+                api_write_upgrade_buffer();
 
         /* 通知上位机当前升级包成功接收 */
         api_response_success(API_COMMAND_UPGRADE);

GD32F103C8T6/App/User/Peripheral/Api/api.h

@@ -22,7 +22,7 @@
 #define API_FRAME_RESPONSE                  (0x01)          /* 响应帧 */
 #define API_FRAME_NOTIFICATION              (0x02)          /* 通知帧 */
 
-#define SOFTWARE_VERSION                    ("V1.26")
+#define SOFTWARE_VERSION                    ("V1.28")
 #define HARDWARE_VERSION                    ("V1.01")
 
 extern uint8_t api_upgrade_mode;

GD32F103C8T6/App/User/app.c

@@ -52,6 +52,8 @@ static uint8_t diaodu_upload_status = 0;
 static void strobe_light_reset(void);
 /* 频闪灯闪烁*/
 static void strobe_light_toggle(uint8_t count);
+/* 投影灯控制 */
+static void lp_light_write(uint8_t status);
 
 /* 设置音量级别 */
 static void set_volume_level(uint8_t level);
@@ -200,6 +202,9 @@ void app_init(void)
 static void strobe_light_reset(void)
 {
     gpio_bit_write(LED_STROBE_PERIPH, LED_STROBE_PIN, RESET);
+    
+        /* 恢复投影灯状态 */
+        lp_light_write(0);
 }
 
 static void strobe_light_toggle(uint8_t count)
@@ -213,6 +218,14 @@ static void strobe_light_toggle(uint8_t count)
     }
 }
 
+static void lp_light_write(uint8_t status)
+{
+    /* 激光投影设备 */
+    gpio_bit_write(LP_FRONT_DOOR_PERIPH, LP_FRONT_DOOR_PIN, (bit_status)status);
+    gpio_bit_write(LP_BACK_DOOR_PERIPH, LP_BACK_DOOR_PIN, (bit_status)status);
+    gpio_bit_write(LP_CAR_REAR_PERIPH, LP_CAR_REAR_PIN, (bit_status)status);
+}
+
 static void led_parsing_task(uint8_t uuid)
 {
     /* 超过 2s 未检测到CAN数据变化，熄灭发送指示灯 */
@@ -407,6 +420,9 @@ static void strobe_light_operate_task(uint8_t uuid)
         return;
     }
 
+    
+    lp_light_write(1);
+
     strobe_light_flashing_count += 1;
 
     if (strobe_light_flashing_mode == 0)
@@ -425,8 +441,6 @@ static void strobe_light_operate_task(uint8_t uuid)
         /* 频闪 */
         gpio_bit_write(LED_STROBE_PERIPH, LED_STROBE_PIN, !(strobe_light_flashing_count % 2));
 
-        // gpio_bit_toggle(LED_STROBE_PERIPH, LED_STROBE_PIN);
-
         if (strobe_light_flashing_count >= 4)
         {
             strobe_light_flashing_count = 0;

GD32F103C8T6/App/main.c

@@ -66,7 +66,13 @@ static void bsp_initialization(void)
     gpio_config(V58_STATUS_PERIPH, V58_STATUS_PIN, GPIO_MODE_IN_FLOATING, GPIO_OSPEED_50MHZ, nullptr);
 
     iic_config(M62429_SDA_PERIPH, M62429_SDA_PIN, M62429_SCL_PERIPH, M62429_SCL_PIN);
-    
+
+    /* 激光投影设备 控制引脚 初始化 */
+    gpio_config(LP_FRONT_DOOR_PERIPH, LP_FRONT_DOOR_PIN, GPIO_MODE_OUT_PP, GPIO_OSPEED_50MHZ, RESET);
+    gpio_config(LP_BACK_DOOR_PERIPH, LP_BACK_DOOR_PIN, GPIO_MODE_OUT_PP, GPIO_OSPEED_50MHZ, RESET);
+    gpio_config(LP_CAR_REAR_PERIPH, LP_CAR_REAR_PIN, GPIO_MODE_OUT_PP, GPIO_OSPEED_50MHZ, RESET);
+
+
     /* CAN指示灯 控制引脚 初始化 */
     gpio_config(LED_CAN_PERIPH, LED_CAN_PIN, GPIO_MODE_OUT_PP, GPIO_OSPEED_50MHZ, RESET);
     

GD32F103C8T6/App/main.h

@@ -104,6 +104,18 @@
 #define M62429_SDA_PERIPH           GPIOB
 #define M62429_SDA_PIN              GPIO_PIN_11
 
+/* 激光投影设备(前门) */
+#define LP_FRONT_DOOR_PERIPH        GPIOC
+#define LP_FRONT_DOOR_PIN           GPIO_PIN_13
+
+/* 激光投影设备(后门) */
+#define LP_BACK_DOOR_PERIPH         GPIOC
+#define LP_BACK_DOOR_PIN            GPIO_PIN_14
+
+/* 激光投影设备(车尾) */
+#define LP_CAR_REAR_PERIPH          GPIOC
+#define LP_CAR_REAR_PIN             GPIO_PIN_15
+
 #define LED_CAN_PERIPH              GPIOA          
 #define LED_CAN_PIN                 GPIO_PIN_5