Firefly RK3288
How to build it
===============
$ make firefly_rk3288_defconfig
Then you can edit the build options using
$ make menuconfig
Compile all and build rootfs image:
$ make
Result of the build
-------------------
After building, you should get a tree like this:
output/images/
├── rk3288-firefly.dtb
├── rootfs.ext2
├── rootfs.ext4 -> rootfs.ext2
├── sdcard.img
├── u-boot-dtb.img
├── u-boot-spl-dtb.bin
├── u-boot-spl-dtb.img
└── uImage
Prepare your SDCard
===================
Buildroot generates a ready-to-use SD card image that you can flash directly to
the card. The image will be in output/images/sdcard.img.
You can write this image directly to an SD card device (i.e. /dev/xxx):
$ dd if=output/images/sdcard.img of=/dev/xxx
Finally, you can insert the SD card to the Firefly RK3288 board and boot it.
